// Baby getting a bit of sun out at Huntington Beach Pier, California. The ist (xA) is small enough
to fit into the tightest parking spots here, and it's a dream to park. All the usual beach gear goes
right into the hatch, and it's perfect for two.

The rear 'ist' logo license plate was made from the dealer ad plates they usually put on your
car when you buy it. The backs of mine where plain white, so I took the two from front and back,
used a black permenant marker to black out their logo completely to prevent show-through,
and super-glued the two face to face, with only the white plastic back showing. A quick stencil
made from the printed 'ist' logo on plain paper was cut using a sharp knife.

Next, the stencil was taped in position while color in the wording on the plastic underneath using
the black market, followed by a layer of clear wrapping tape on top to prevent any ink bleeding
or running on rainy days, and finally, another pass with the knife to cut the tape around the wording.

Voila! - free "ist" logo license plate! //